YTRLV-8 integrated vibration transmitter is equipped with MEMS piezoelectric element, which can sense vibration signal very sensitively and convert it into 4-20mA current signal output proportional to vibration speed signal through high-precision signal conditioning circuit. It is very suitable for connecting to DCS and PLC system.

YTRLV-8 integrated vibration transmitter is the best choice for long-term on-line monitoring of the vibration of various rotating and reciprocating machines (absolute vibration of casings, bearings, or mechanisms).

Main performance indexes:

Power:  Two wire system _ two wire loop power supply 15～30VDC（TRLV-8）

        Three wire system _15～30VDC（TRLV-8）

Measuring range:  RMS or peak PK (optional)

Frequency response:  10-1000Hz,±3dB

Sensitive direction:  axial

Current output:  4-20mA proportional to vibration speed

Error:  ≦±3% F.S

Lateral sensitivity:  ≦±5%

Dynamic signal output:  buffered sensor signal output buf (optional)

Load capacity:  ≤ 700 Ω (two lines), ≤ 500 Ω (three lines)

Shell isolation:  500V, insulation resistance ≥ 108 Ω

Grounding:  insulation between shell and circuit; internal shielding

Impact limit:  1000g

electromagnetic compatibility:  IEC61000-4

Outgoing way:  air plug, integral cable, explosion-proof, etc

Environmental restrictions:

Operating environment:  temperature range: -40℃～+70℃

                   Relative humidity: no more than 95%, no condensation

Environmental protection: the overall cable outgoing way protection grade is IP67, others are IP65

Physical properties: shell: 316L stainless steel, internal sealed with epoxy resin

Size:   Overall cable: ∮36×73mm

Flight insertion: ∮36×70mm

Explosion proof body: ∮36×66mm, whole: ∮62×145mm

Weight: about 320g for integral cable and navigable outlet, about 660g for explosion-proof whole